Door Control
Door Control provides real-time status of all door contacts and door locks throughout the system. Please note that only doors from online controllers will be displayed with their real-time status. The steps below will guide you in manually contro...
Control Points
Control Points are output points which allow you to attach devices that you can control from the system. The Control Points module provides a real-time status of all Output points that you have in the system, please note that only Outputs from on...
Custom Commands
A Custom Command is a software button that performs a function, such a Momentary Unlock, Activating a Relay Output, or changing the Reader Mode. Follow the steps below to configure a Custom Command to change Reader Modes from Unlocked to Card or...
Graphic Maps - Importing Maps
Graphic maps gives you a visual representation of your site, where you can plot Readers, Inputs, Output etc. The steps below will guide you to import a map into UnityIS. From the dashboard, click on Monitor and Control and then select Graphi...
Graphic Maps - Plotting Devices
To plot devices, like Readers, Inputs, Outputs etc. on a graphic map please follow the steps below: From the main menu, click on Monitor and Control and then select Graphic Maps to open the module. Once the module is opened, click on Configur...
Graphic Maps - Un-plotting Devices
To un-plot devices from graphic maps, follow the steps below: From the main menu click on Monitor and Control and then click on Graphic Maps to open the module. Once the module is opened, click on Configuration Mode to go to configuration me...