Axis A1001- Configure Port Address Translation (PAT) to talk to UnityIS Cloud

Configuring Port Address Translation for Axis A1001 Network Controller

1. No changes needed in Axis Entry Manager. The network settings of the Axis A1001 remains the same

2. In your router/switch/firewall device, establish Port Forwarding rules for:

3. Add your AXIS Controllers with the following properties:

Service Type: HTTP

External Port: Any available port. One port per A1001

Internal IP: IP Address of AXIS Controller

Internal Port: 80

Protocol: TCP

(NOTE: Your router settings will look different, but concept is the same)

All the settings will be the same except for External Port and Internal IP. For External Port, use a different once for each AXIS A1001. For Internal IP, enter the IP of each AXIS A1001 Controller. The Internal Port will always be 80, as this is what is defined in Axis Entry Manager.

Also, we will need the public IP of your network.

I