Trigger/Macro example - Access Granted Trigger to Pulse Relays

This trigger/macro is used to program a controller* to use 'Access Granted' event as the trigger, with Personnel trigger code XXX to fire Macro commands to turn on Variables and pulse outputs

Updated April 16, 2025

Note: * = applies to Azure IC2 only

Trigger Event: Access Granted (or any other Access Granted events)

Trigger Condition: Personnel with Trigger Code X, at Anytime (Always), while Trigger Variable X = OFF and Trigger Variable Y = OFF

Execute Macro: add the following commands

Set Trigger Variable	Address: 2.0	Properties: 1 1
Command: Control Point: Pulse	Address: 2.0.0.O2: Door Sounder 2	Properties: 5
Command: Control Point: Pulse	Address: 2.0.0.O4: Door Sounder 4	Properties: 5
Command: Delay Command	Address: 2.0	Properties: 5
Command: Set Trigger Variable	Address: 2.0	Properties: 1 0

Was this article helpful?